Glass units

Glass units — what to choose and why

Glass usually makes up 70–80% of a window, so the glass unit has the biggest effect on warmth, light, noise and safety. Here we explain the options in plain words. If you know what you need, price and order your glass unit online.

Price and order your glass unit

Pick a ready unit or build your own, enter sizes — see price, weight and light transmittance at once.

  • Instant price
  • Size limits checked automatically
  • Also for glass-only replacement
Glass unit calculator and ordering →

What is a glass unit?

An insulating glass unit is two or three panes bonded and sealed at the edge. Between the panes is a dry gas fill, and a spacer at the edge keeps the panes apart. The Ug value (W/m²K) shows heat loss through the glass — the lower, the better.

We use Glaskon glass units. They suit new windows as well as replacing glass in existing windows and doors.

Double or triple?

A triple unit (three panes) keeps heat in roughly twice as well as a double unit (two panes). In the Estonian climate, a triple energy-saving unit is the standard for homes.

  • Triple + warmer room, lower heating bill, less condensation at the inner edge
  • Triple – heavier (about 30 kg/m² vs 20 kg/m²), slightly less light, thicker
  • Double + lighter and cheaper — for unheated rooms, balcony glazing, sheds and thin older frames
  • Double – loses roughly twice as much heat

Low-E (low-emissivity) glass

An invisible metal-oxide layer reflects heat back into the room. Every modern energy-saving unit has one — a good Ug value is not possible without it.

  • + Much better insulation, looks like ordinary glass
  • – Slightly lowers solar heat gain (g value), so a little less 'free' heat in winter

Argon fill

The gap between panes is filled with argon, which is heavier than air and conducts heat less. Argon is our standard and selected by default.

  • + Better Ug without extra thickness; the gas is safe and invisible
  • – Very slow gas loss over decades — negligible in a well-made unit

Warm edge spacer

A standard aluminium spacer conducts cold to the glass edge; a 'warm' plastic or composite spacer breaks that cold bridge.

  • + Warmer glass edge, less condensation and mould in the bottom corner, better overall window Uw
  • – Small extra cost; the black or grey spacer is visible at the glass edge

Safety glass: toughened and laminated

Toughened (tempered) glass is several times stronger than ordinary glass and breaks into small blunt pieces. Laminated glass (e.g. 33.1, 44.2) is two panes with an interlayer — when broken, the fragments stay on the film.

  • Toughened + resists impact and temperature stress, breaks safely — doors, low windows, large areas
  • Toughened – cannot be cut or worked after toughening
  • Laminated + stays in the frame when broken, resists break-ins (up to class P4A), dampens noise, blocks UV
  • Laminated – heavier and more expensive than ordinary glass

Solar control glass

Solar control or tinted glass lets less solar heat through (lower g value). Good for large south- and west-facing windows, conservatories and offices.

  • + Rooms don't overheat in summer, less need for air conditioning, less fading of furniture
  • – Less light and less winter solar heat; reflective or tinted look

Acoustic glass

Noise is reduced best by panes of different thickness (e.g. 6 mm and 4 mm) and by laminated acoustic glass. For busy roads, railways or airports.

  • + Noticeably quieter rooms, often combined with safety properties
  • – Heavier and more expensive; full effect only with a well-installed window

Obscure and patterned glass

Frosted and patterned glass let light through but hide the view. For bathrooms, toilets, saunas and entrance doors.

  • + Privacy without curtains, daylight stays
  • – No view out; some patterns cannot be combined with every coating

Glass thickness and size

The larger the pane, the thicker it must be to withstand wind and its own weight. Our calculator checks the manufacturer's size limits automatically: if a pane is too thin for the size, it switches to thicker glass and tells you why.

Glass unit only — replacing glass in an old window

If the window is fine but the unit is broken, misted inside, or you want better insulation, you can replace just the glass unit. Measure the glass width and height inside the frame and the unit thickness. The calculator shows price, weight, light transmittance and insulation for every unit.

Frequently asked questions

Your price now — no waiting

Pick a product, enter sizes or send a photo. See a preliminary price, weight and Uw value in seconds.